Accessories
Connectors
| Ordering information | Description | Pict. |
|---|---|---|
| ZS1090-0003 | EtherCAT/Ethernet RJ 45 connector, IP 20, 4-pin, for field-assembly | A |
| ZS1090-0005 | EtherCAT/Ethernet RJ 45 plug, IP 20, 8-pin, field assembly | B |
Cables
| Ordering information | Description |
|---|---|
| ZB9010 | Industrial Ethernet/EtherCAT cable, fixed installation, CAT 5e, 4 wires |
| ZB9020 | Industrial Ethernet/EtherCAT cable, drag chain suitable, CAT 5e, 4 wires |
Patch cable
The pre-assembled Ethernet/EtherCAT cables with RJ 45 plug enable fast, easy wiring inside the control cabinet and are suitable for short distances on the machine. The robust, industrial quality PUR cables distinguish themselves from office cables by both their mechanical and their EMC characteristics.
| Technical data | ZK1090-9191-0001 | |||||||
|---|---|---|---|---|---|---|---|---|
| Cross-section | 4 x 2 x AWG26/7…4 x 2 x 0.128 mm² | |||||||
| Cable sheath material | PUR | |||||||
| Colour | green (RAL 6018) | |||||||
| Line configuration | SF/UTP | |||||||
| Diameter | sheath: typ. 5.8 mm ±0.2 mm | |||||||
| Bending radius | > 5 x diameter | |||||||
| Category/class | CAT5, class D | |||||||
| Operating/installation temperature | -40…+75 °C/-10…+60 °C | |||||||
| Insertion cycles | min. 750 | |||||||
| Ordering information | Cable |
|---|---|
| ZK1090-9191-0001 | Industrial Ethernet/EtherCAT patch cable, 0.17 m |
| ZK1090-9191-0002 | Industrial Ethernet/EtherCAT patch cable, 0.26 m |
| ZK1090-9191-0005 | Industrial Ethernet/EtherCAT patch cable, 0.5 m |
| ZK1090-9191-0010 | Industrial Ethernet/EtherCAT patch cable, 1.0 m |
| ZK1090-9191-0020 | Industrial Ethernet/EtherCAT patch cable, 2.0 m |
| ZK1090-9191-0030 | Industrial Ethernet/EtherCAT patch cable, 3.0 m |
| ZK1090-9191-0050 | Industrial Ethernet/EtherCAT patch cable, 5.0 m |
| ZK1090-9191-0100 | Industrial Ethernet/EtherCAT patch cable, 10.0 m |
Connectors for KS Bus Terminals, ES EtherCAT Terminals
| Ordering information | Description |
|---|---|
| ZS2010 | 10 connectors for KS and ES series, spare part (KS/ES terminals are supplied with connector.) |
Connectors for KM and EM modules
| Ordering information | Description |
|---|---|
| ZS2001-0001 | connector for KM or EM module, 1-pin, without LED; spare part (KM and EM terminals are supplied with connector.) |
| ZS2001-0002 | connector for KM or EM module, 1-pin, with LED; spare part (KM and EM terminals are supplied with connector.) |
| ZS2001-0004 | connector for KM or EM module, 3-pin, with LED; spare part (KM and EM terminals are supplied with connector.) |
| ZS2001-0005 | connector for KM module, 1-pin, without LED, labelling (1…10); spare part (KM and EM terminals are supplied with connector.) |
Assembly aids
| Ordering information | Description |
|---|---|
| ZB8700 | slot screwdriver assembly tool for pressing the spring force clamps on the Bus Coupler and the Bus Terminals |
Bus system housing
The BG1558 and BG1559 housings are especially suitable for the construction of compact I/O stations with a higher protection class (IP 65). The housings are supplied with mounting rails. If desired, the housings can be supplied fully fitted with EtherCAT Terminals, flanges and PG threaded fittings. Further sizes are available on request.
If desired, the housing can be supplied fully fitted with Bus Coupler, Bus Terminals, flanges and PG threaded fittings. Further sizes are available on request.
| Ordering information | Description | Pict. |
|---|---|---|
| BG1558 | bus system housing 400 mm x 200 mm x 120 mm (W x H x D) with mounting rail and holes | A |
| BG1559 | bus system housing 600 mm x 200 mm x 120 mm (W x H x D) with mounting rail and holes |
Marking material
The EtherCAT Terminals can be individually labelled with standard contact signs. The marking material is not included in the EtherCAT Terminal delivery.
Contact label overview
Coding pins and sockets for KS and ES terminals
The coding pins and sockets for ZS2010 and KS/ES terminals with pluggable wiring level enable coding between terminal and plug in order to prevent incorrect plug insertion.
| Ordering information | Description |
|---|---|
| ZS2010-0010 | The set contains 100 sockets and 100 pins. |
Demokit
The EtherCAT Demokits are intended for newcomers to EtherCAT. They comprise an EK1100 EtherCAT Coupler, two EL1014 input terminals, two EL2004 output terminals, assembly material, cables and a written introduction. A TwinCAT PLC licence is available if desired.
| Ordering information | Description |
|---|---|
| TC9910-B110 | EtherCAT demokit, with TwinCAT PLC license |
| TC9910-B111 | EtherCAT demokit, without TwinCAT PLC license |