RxD LED
TxD LED
Run LED
Power contact
+24 V
Power contact 0 V
TxD
RTS
GND
Shield
RxD
CTS
GND
Shield
Top view
Contact assembly
EL6001 | Serial interface RS232
The EL6001 serial interface enables the connection of devices with RS232 interface and operates in conformity with the CCITT V.28/DIN 66 259-1 standards. The device connected to the EL6001 EtherCAT Terminal communicates with the automation device via the coupler. The active communication channel operates independently of the higher-level bus system in full duplex mode at up to 115.2 kbaud. The RS232 interface guarantees high immunity to interference through electrically isolated signals.
In conjunction with the TwinCAT Virtual Serial COM Driver (see TwinCAT Supplements – Communication) the EL6001 can be used as a normal Windows COM interface.
| Technical data |
EL6001 | ES6001 |
| Technology |
terminal contact |
| Data transfer channels |
2 (1/1), TxD and RxD, full duplex |
| Data transfer rates |
2,400…115,200 baud; default: 9,600 baud, 8 data bits, no parity and one stop bit |
| Bit distortion |
< 3 % |
| Line impedance |
– |
| Cable length |
max. 15 m |
| Interfaces |
1 x RS232 |
| Providing external supply |
– |
| Power supply |
via the E-bus |
| Electrical isolation |
500 V (E-bus/signal voltage) |
| Data buffer |
864 bytes receive buffer, 128 bytes transmit buffer |
| Bit width in the process image |
22 x 8 bit input, 22 x 8 bit output, 16 bit control, 16 bit status |
| Configuration |
no address setting, configuration via the controller |
| Current consumption E-bus |
typ. 120 mA |
| Weight |
approx. 55 g |
| Operating/storage temperature |
0…+55 °C/-25…+85 °C |
| Relative humidity |
95 %, no condensation |
| Vibration/shock resistance |
conforms to EN 60068-2-6/EN 60068-2-27/29 |
| EMC immunity/emission |
conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. |
IP 20/variable |
| Pluggable wiring |
for all ESxxxx terminals |
| Approvals |
CE, UL, Ex |
 |
 |