EP2328-0002 | 4 x digital input and 4 x digital output 24 V DC, IMAX = 2 A (∑ 4 A)

The EP2328 EtherCAT Box combines four digital inputs and four digital outputs in one device. A filter constant of 3.0 ms is available for the inputs. The outputs handle load currents of up to to 2 A each, although the total current is limited to 4 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time, or in which not all of the actuators draw 2 A signal current.

The state of each signal is indicated by means of light emitting diodes. The signals are connected via screw type M12 connectors. The sensors are powered by the load voltage UP.

Technical data	EP2328-0002
Specification	EN 61131-2, type 1/3
Number of channels	4 inputs + 4 outputs
Input/output connections	M12, screw type
Protocol	EtherCAT
Bus interface	2 x M8, shielded, screw type
Input filter	3.0 ms
“0“ signal voltage	-3…+5 V
“1“ signal voltage	11…30 V, 6 mA input current (EN 61131-2, type 3)
Sensor supply	derived from load supply voltage, max. 0.5 A total, short-circuit-proof
Load type	ohmic, inductive, lamp load
Rated load voltage	24 V DC (-15 %/+20 %)
Max. output current	2.0 A
Short circuit current	typ. 4 A
Auxiliary power current	typ. 20 mA + load
Current consumption from US (without sensor current)	120 mA
Power supply connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image	4 inputs + 4 outputs
Electrical isolation	500 V
Weight	approx. 165 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 65/66/67 (conforms to EN 60529)/variable
Approvals	CE, UL