IL230x-Bxxx | 4 x digital input + 4 x digital output 24 V DC, IMAX = 0.5 A

The IL230x Coupler Box modules combine four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 0.5 A, are short-circuit-proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes. The signals are connected optionally via 8 mm snap type (IL2300), M8 (IL2301) or M12 (IL2302) screw type connectors.

Technical data	IL2300-Bxxx	IL2301-Bxxx	IL2302-Bxxx
Specification	EN 61131-2, type 2
Number of channels	4 inputs + 4 outputs
Input/output connections	8 mm, snap type	M8, screw type	M12, screw type
Input filter	3.0 ms
“0“ signal voltage	-3…+5 V
“1“ signal voltage	11…30 V, 6 mA input current (EN 61131-2, type 2)
Sensor supply	derived from control voltage, max. 0.5 A total, short-circuit-proof
Load type	ohmic, inductive, lamp load
Rated load voltage	24 V DC (-15 %/+20 %)
Max. output current	0.5 A on each channel, individually short-circuit-proof
Short circuit current	typ. 1.5 A
Auxiliary power current	typ. 20 mA
Power supply connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image	4 inputs + 4 outputs
Electrical isolation	channels/control voltage: no, between the channels: no, control voltage/fieldbus: depends on the bus system
Current consumption from US	see documentation
Special features	IP-Link coupler
Operating/storage temperature	0…+55 °C/-25…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 65/66/67 (conforms to EN 60529)/variable
Approvals	CE, UL