TwinCAT Valve Diagram Editor

In order to linearise non-linear characteristic curves of hydraulic valves, a velocity curve that has been measured for the output voltages has to be read in and approximated by a characteristic curve. The measured characteristic curve can be graphically linearised very easily in the TwinCAT Valve Diagram Editor. Only a few interpolation points are required to generate a straight line or a 5th degree polynomial between them. The characteristic linearisation curve thus determined is then loaded into the TwinCAT NC real time and taken into account when the voltages are output in the drive. Online monitoring is possible at any time.

Technical data	TwinCAT Valve Diagram Editor
Target system	Windows NT/2000/XP/Vista, Windows 7 PC (x86-compatible)
Min. TwinCAT level	TwinCAT NC PTP

Ordering information
TwinCAT Valve Diagram Editor	graphical tool for designing the characteristic curve of a hydraulic valve