Training

Beckhoff North America - Product Training


2016 TwinCAT Training Schedule
Class Location Date Days
TwinCAT 3 PLC with Motion and Safety (TR3028) Mechanicsburg, PA January 11 - 15 Mon - Fri (5 Days)
Hardware and Communication (TR1010) Savage, MN January 12 - 14 Tue - Thu (3 Days)
TwinCAT 3 Accelerated Introductory Training for Engineers (TR3029) San Jose, CA January 12 - 14 Tue - Thu (3 Days)
TwinCAT 3 Training: Basic I/O, Communication, System Manger, and PLC Programming (TR3025) Charlotte, NC January 18 - 22 Mon - Fri (5 days)
TwinCAT 3 Programming (TR3020) Savage, MN January 26 - 28 Tue - Thu (3 Days)
PLC Software (TR1020) Charlotte, NC January 26 - 28 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Mechanicsburg, PA February 2 - 4 Tue - Thu (3 Days)
TwinCAT 3 PLC with Motion and Safety (TR3028) Charlotte, NC February 8 - 12 Mon - Fri (5 Days)
Hardware and Communication (TR1010) Savage, MN February 16 - 18 Tue - Thu (3 Days)
TwinCAT 3 Training: Basic I/O, Communication, System Manger, and PLC Programming (TR3025) Savage, MN February 22 - 26 Mon - Fri (5 days)
TwinCAT 3 Programming (TR3020) San Jose, CA February 23 - 25 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Charlotte, NC February 23 - 25 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Mechanicsburg, PA March 1 - 3 Tue - Thu (3 Days)
Hardware and Communication (TR1010) Charlotte, NC March 8 - 10 Tue - Thu (3 Days)
PLC with Motion (TR2022) Savage, MN March 15 - 17 Tue - Thu (3 Days)
TwinCAT 3 Accelerated Introductory Training for Engineers (TR3029) San Jose, CA March 15 - 17 Tue - Thu (3 Days)
PLC with Motion (TR2022) Charlotte, NC March 22 - 24 Tue - Thu (3 Days)
TwinCAT 3 Maintenance, repairs and service (TR3010C) Mississauga, ON March 28 – April 1 Mon noon - Fri noon (4 Days)
TwinCAT 3 Programming (TR3020) Savage, MN March 29 - 31 Tue - Thu (3 Days)
TwinCAT 3 Hardware and Communication (TR3010) San Jose, CA April 5 - 7 Tue - Thu (3 Days)
TwinCAT 3 PLC with Motion and Safety (TR3028) Mechanicsburg, PA April 4 - 8 Mon - Fri (5 Days)
TwinCAT 2 Training: Basic I/O, Communication, System Manger, and PLC Programming (TR1025) Charlotte, NC April 11 - 15 Mon - Fri (5 days)
TwinCAT 3 Programming (TR3030) Mississauga, ON April 11 - 15 Mon - Fri (5 Days)
TwinCAT 3 Programming (TR3020) San Jose, CA April 19 - 21 Tue - Thu (3 Days)
TwinCAT 3 Hardware and Communication (TR3010) Savage, MN April 26 - 28 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Charlotte, NC April 26 - 28 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Mechanicsburg, PA May 3 - 5 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Savage, MN May 10 - 12 Tue - Thu (3 Days)
Hardware and Communication (TR1010) Charlotte, NC May 10 - 12 Tue - Thu (3 Days)
PLC Software (TR1020) Savage, MN May 17 - 19 Tue - Thu (3 Days)
TwinCAT 3 Accelerated Introductory Training for Engineers (TR3029) San Jose, CA May 17 - 19 Tue - Thu (3 Days)
TwinCAT 3 Hardware and Communication (TR3010) Mechanicsburg, PA May 17 - 19 Tue - Thu (3 Days)
TwinCAT 3 Hardware and Communication (TR3010) Charlotte, NC May 24 - 26 Tue - Thu (3 Days)
TwinCAT 2 Training: Basic I/O, Communication, System Manger, and PLC Programming (TR1025) Savage, MN June 6 - 10 Mon - Fri (5 days)
TwinCAT 3 PLC with Motion and Safety (TR3028) Mechanicsburg, PA June 6 - 10 Mon - Fri (5 Days)
TwinCAT 3 Programming (TR3020) San Jose, CA June 7 - 9 Tue - Thu (3 Days)
TwinCAT 3 PLC with Motion and Safety (TR3028) Savage, MN June 13 - 17 Mon - Fri (5 Days)
TwinCAT 3 Programming (TR3020) Charlotte, NC June 14 - 16 Tue - Thu (3 Days)
TwinCAT 3 Maintenance, repairs and service (TR3010C) Mississauga, ON June 20 - 24 Mon noon - Fri noon (4 Days)
TwinCAT 3 Hardware and Communication (TR3010) Savage, MN June 28 - 30 Tue - Thu (3 Days)
PLC with Motion (TR2022) Charlotte, NC June 28 - 30 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3030) Mississauga, ON July 4 - 8 Mon - Fri (5 Days)
TwinCAT 3 Programming (TR3020) Mechanicsburg, PA July 5 - 7 Tue - Thu (3 Days)
Hardware and Communication (TR1010) Charlotte, NC July 12 - 14 Tue - Thu (3 Days)
PLC Software (TR1020) Savage, MN July 19 - 21 Tue - Thu (3 Days)
TwinCAT 3 Accelerated Introductory Training for Engineers (TR3029) San Jose, CA July 19 - 21 Tue - Thu (3 Days)
TwinCAT 3 Training: Basic I/O, Communication, System Manger, and PLC Programming (TR3025) Charlotte, NC July 25 - 29 Mon - Fri (5 days)
TwinCAT 3 Programming (TR3020) Savage, MN July 26 - 28 Tue - Thu (3 Days)
TwinCAT 3 PLC with Motion and Safety (TR3028) Mechanicsburg, PA August 1 - 5 Mon - Fri (5 Days)
Hardware and Communication (TR1010) Savage, MN August 9 - 11 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) San Jose, CA August 9 - 11 Tue - Thu (3 Days)
TwinCAT 3 PLC with Motion and Safety (TR3028) Charlotte, NC August 15 - 19 Mon - Fri (5 Days)
TwinCAT 3 Training: Basic I/O, Communication, System Manger, and PLC Programming (TR3025) Savage, MN August 22 - 26 Mon - Fri (5 days)
TwinCAT 3 Programming (TR3020) Charlotte, NC August 23 - 25 Tue - Thu (3 Days)
TwinCAT 3 Hardware and Communication (TR3010) Charlotte, NC September 6 - 8 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Mechanicsburg, PA September 6 - 8 Tue - Thu (3 Days)
PLC Software (TR1020) Savage, MN September 13 - 15 Tue - Thu (3 Days)
TwinCAT 3 Accelerated Introductory Training for Engineers (TR3029) San Jose, CA September 13 - 15 Tue - Thu (3 Days)
TwinCAT 2 Training: Basic I/O, Communication, System Manger, and PLC Programming (TR1025) Charlotte, NC September 19 - 23 Mon - Fri (5 days)
TwinCAT 3 Maintenance, repairs and service (TR3010C) Mississauga, ON September 19 - 23 Mon noon - Fri noon (4 Days)
TwinCAT 3 Programming (TR3020) Savage, MN September 27 - 29 Tue - Thu (3 Days)
TwinCAT 3 PLC with Motion and Safety (TR3028) Mechanicsburg, PA October 3 - 7 Mon - Fri (5 Days)
TwinCAT 3 Programming (TR3030) Mississauga, ON October 3 - 7 Mon - Fri (5 Days)
Hardware and Communication (TR1010) Savage, MN October 11 - 13 Tue - Thu (3 Days)
PLC Software (TR1020) Charlotte, NC October 11 - 13 Tue - Thu (3 Days)
TwinCAT 3 Hardware and Communication (TR3010) San Jose, CA October 11 - 13 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Charlotte, NC October 18 - 20 Tue - Thu (3 Days)
TwinCAT 3 Hardware and Communication (TR3010) Savage, MN October 25 - 27 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) San Jose, CA October 25 - 27 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Mechanicsburg, PA November 1 - 3 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) Savage, MN November 8 - 10 Tue - Thu (3 Days)
Hardware and Communication (TR1010) Charlotte, NC November 8 - 10 Tue - Thu (3 Days)
TwinCAT 3 PLC with Motion and Safety (TR3028) Savage, MN November 14 - 18 Mon - Fri (5 Days)
TwinCAT 3 Hardware and Communication (TR3010) Charlotte, NC November 15 - 17 Tue - Thu (3 Days)
TwinCAT 3 Accelerated Introductory Training for Engineers (TR3029) San Jose, CA November 15 - 17 Tue - Thu (3 Days)
TwinCAT 3 PLC with Motion and Safety (TR3028) Mechanicsburg, PA December 5 - 9 Mon - Fri (5 Days)
TwinCAT 2 Training: Basic I/O, Communication, System Manger, and PLC Programming (TR1025) Savage, MN December 5 - 9 Mon - Fri (5 days)
TwinCAT 3 Maintenance, repairs and service (TR3010C) Mississauga, ON December 5 - 9 Mon noon - Fri noon (4 Days)
TwinCAT 3 Programming (TR3020) Charlotte, NC December 6 - 8 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3030) Mississauga, ON December 12 - 16 Mon - Fri (5 Days)
PLC with Motion (TR2022) Savage, MN December 13 - 15 Tue - Thu (3 Days)
PLC Software (TR1020) Charlotte, NC December 13 - 15 Tue - Thu (3 Days)
TwinCAT 3 Programming (TR3020) San Jose, CA December 13 - 15 Tue - Thu (3 Days)


Customer Specific Training**
Beckhoff also offers customer specific classes. These classes can be held at our training facilities in Minneapolis, Charlotte, San Diego, Mississauga Ontario (Toronto) or onsite. These classes are designed for customers who have 4 or more employees who are in need of training as a group and would like training geared toward their specific application. The class can be any one of the standard classes or completely customized. Please contact Beckhoff for scheduling of these classes.

**Custom/On-Site Classes available upon request during non-scheduled weeks


Training Locations
Beckhoff Headquarters North America (Minneapolis)
13130 Dakota Avenue
Savage, MN 55378

Beckhoff West Region Sales (San Francisco, San Jose and Northern CA)
3665 N. 1st St.
San Jose, CA 95134

Beckhoff East Region Headquarters and Training Center (Charlotte)
818 Tyvola Rd, Suite 100
Charlotte, NC 28217

Beckhoff Central Region (IL, Northwest IN)
1200 Internationale Parkway, Ste 100
Woodridge, IL 60517

Beckhoff Northeast Region Training Center
100 Sterling Parkway, Suite 106
Mechanicsburg, PA 17050

Beckhoff Automation Canada Ltd. (Mississauga)
2900 Argentia Road, Suite 7
Mississauga, ON L5N 7X9
Canada



Back Top Beckhoff, Email: beckhoff.usa@beckhoff.com